Forks Bolted to Palletizer 1455 mm

A wide range of forks in our company will allow you to choose the one that meets almost all your needs. We have forks with different types of mountings. Forks are available in dozens of sizes. Customers can find forks in the appropriate strength class with us. The forks are made of high-quality steel, resistant to mechanical wear. A properly cast profile makes them a precise tool for lifting various loads. Their durability guarantees long service life and efficient work.

The long-term presence of Jazgot on the market has allowed us to gain specialist and precise knowledge in the forklift industry. Thanks to this, our customers can count on professional advice and reliable service.

The price given in the auction description applies to one fork.

Due to the lifting capacity of the forklift, there are 5 classes of carriages. The type of class will depend on the height at which the lower fork hook is located - type "A" or "B"

How to choose the right fork class?

- to determine the fork class, measure the dimension between the hooks (Fig. H2)

- to determine type "A" or "B", measure the dimension from the bottom of the fork to the top hook (Fig. H1)

- the dimensions taken should be compared with the data from the table below

"Example: dimension H2=382 mm and H1+ 546 forks fall into class 2B"

To ensure safety during work, be careful and check the technical condition of the forks. Helpful rules:

* Forks are a replaceable part, regardless of their resistance, they wear out as a result of friction on the ground. Therefore, the thickness of the flat bar should be checked regularly - this affects their load-bearing capacity.

* Avoid lifting loads with the fork tips or only one of them.

* Make sure that the forks are subjected to timely technical inspections - no less than every 12 months.

Specification:

Flat bar profile dimensions - 80x50 mm

Total height - 1455 mm

Fork length - 1150 mm

The forks have holes for screwing them to the palletizer

The forks have a declaration of conformity, necessary to obtain a UDT certificate - a certificate attesting to their quality and safe use.

Wymiary podano w milimetrach.