Oemetol 600HC

OEMETOL 600 HC is a high-quality pure oil, based on modern oils derived from hydrocracking. This product is suitable for all machining processes.

BENEFITS:

Does not contain heavy metals or chlorine.

Suitable for grinding Fe and Al alloys.

High ability to work under high pressure and high lubrication efficiency.

Reduced tool wear thanks to EP (extreme pressure) and AW (anti-wear) additives.

Good chip removal capability and heat dissipation due to low viscosity.

Low emission (Noack at 150°C: 3.9%).

Very good anti-foaming properties.

Natural fragrance.

OIL PARAMETERS:

IDENTIFICATION           METHOD                     UNIT                           VALUE

Density: 20 °C              DIN 51 757                 [KG/M^3]                    839

Viscosity: 40 °C            DIN 53 018                 [MM^2/S]                    9.2

Flash Point                   DIN EN 27 19               °C                              174

Copper Corrosion         DIN EN ISO 2160           Corrosion category      1a

                                                                      (3h at 100°C)

The capacity of the barrel is 170 kilograms.