Forks for forklift 1220 mm
Indeks: 122*50*1150
Quantity: 0
State: Inaccessible
The pitchforks are sold in pairs, i.e. 2 pieces.
The price quoted is for 1 pitchfork.
Product Review
-
Reviews (0)
-
Latest
-
Latest
Forks for Forklift 1220 mm
The forks are made of high-quality structural steel. They are universally applicable and can therefore be mounted on forklifts of various brands, provided that the fork class and load capacity are maintained.
- • Profile dimensions: 122 x 50 mm
- • Load capacity: 3500 kg
- • Carriage class: 3A
- • Fork length: 1220 mm
 |
Safety lock
The forks are sold with a locking pin that prevents accidental slipping off the carriage during operation and maneuvering. |
Before purchase
|
CHECK CARRIAGE CLASS COMPATIBILITY
|
MATCH PROFILE DIMENSIONS TO LOAD DIMENSIONS
|
VERIFY FORK LENGTH IN RELATION TO THE REQUIRED SUPPORT SURFACE
|
How to check the carriage class and fork condition before replacement?
Before selecting forks, the compliance of the forklift carriage class must be confirmed according to the ISO 2328 standard. The classes differ by the distance between the upper and lower hook. For class 3A, it is approximately 508 mm. This can be verified by measuring the distance between the upper and lower hook on the fork carrier, checking the forklift nameplate, or consulting the manufacturer’s technical documentation. Correctly matching the fork class to the carriage class is a requirement for safe installation and use.
Before replacement, the technical condition of the existing forks should also be assessed. Forks must be replaced if the thickness in the working area has decreased by about 10% compared to the nominal dimension, if they have cracks in the hook area or at the heel, or show permanent deformation or twisting of the profile. Cross-section wear leads to an actual reduction in forklift load capacity and may be questioned during a UDT inspection.
FAQ
CAN FORKS BE REPLACED INDIVIDUALLY?
No. Forks should be replaced in pairs to ensure even load distribution and forklift stability.
WHEN SHOULD FORKS BE REPLACED?
In case of permanent deformation, cracking, twisting, or significant cross-section wear. Damaged forks should not be used further.
WHAT DOES CLASS 3A MEAN?
Fork class 3A is a designation according to the ISO 2328 standard, which defines the dimensions and type of mounting hooks for forklift forks. In class 3A, the distance between the mounting hooks is approximately 508 mm. The letters A and B indicate the hook type (hook profile). The carriage class must match the fork class to ensure correct and safe installation.
IS A SAFETY LOCK INCLUDED WITH THE FORKS?
Yes. A locking pin is included with the forks to prevent them from slipping off the forklift carriage.
Ask about product
Technical informations
Specific References
- EAN13
- 1000001001807
You might also like
16 other products in the same category:
- New
Customers who bought this product also bought:
Product Review
-
Reviews (0)
-
Latest
-
Latest
The pitchforks are sold in pairs, i.e. 2 pieces.
The price quoted is for 1 pitchfork.