Forks for forklift 1000 mm
Indeks: 120*50*1000
Quantity: 18
State: Available
Product Review
-
Reviews (0)
-
Latest
-
Latest
Forks for Forklift 1000 mm
The forks are made of high-quality structural steel. They are universally applicable and can therefore be mounted on forklifts of various brands, provided that the fork class and load capacity are maintained.
- • Profile dimensions: 80x40 / 100x35 / 100x40 / 100x45 / 120x50 / 125x45 mm
- • Load capacity: 2000 / 2500 / 3500 / 4100 / 4500 kg
- • Fork class: 2A / 2B / 3A / 3B / 4A
- • Fork length: 1000 mm
 |
Safety lock
The forks are sold with a locking pin that prevents accidental slipping off the carriage during operation and maneuvering. |
Before purchase
|
CHECK CARRIAGE CLASS COMPATIBILITY
|
MATCH PROFILE DIMENSIONS TO LOAD DIMENSIONS
|
VERIFY FORK LENGTH IN RELATION TO THE REQUIRED SUPPORT SURFACE
|
How to check the forklift carriage class and fork condition before replacement?
Before selecting forks, the compliance of the forklift carriage class must be confirmed according to ISO 2328, which defines the height and spacing of the mounting hooks. The classes differ by the distance between the upper and lower hook: 2A/2B – approx. 407 mm, 3A/3B – approx. 508 mm, 4A – approx. 635 mm. The designations A and B refer to the hook construction (hook type), while the dimensions remain the same within a given class. The class can be verified by measuring the distance between the upper and lower hook on the carriage, checking the forklift nameplate, or consulting the manufacturer’s technical documentation. Proper matching of the fork class to the carriage class is a requirement for safe installation and use.
Before replacement, the technical condition of the existing forks should also be assessed. Forks must be replaced if the thickness of the working section has decreased by approximately 10% compared to the nominal dimension, if they show cracks in the hook area or at the heel, or exhibit permanent deformation or twisting of the profile. Cross-section wear leads to an actual reduction in forklift load capacity and may be questioned during a UDT inspection.
FAQ
CAN FORKS BE REPLACED INDIVIDUALLY?
No. Forks should be replaced in pairs to ensure even load distribution and forklift stability.
WHEN SHOULD FORKS BE REPLACED?
In case of permanent deformation, cracks, twisting, or significant cross-section wear. Damaged forks should not be used further.
WHAT DO CLASSES 2A, 2B, 3A, 3B AND 4A MEAN?
Carriage classes 2A, 2B, 3A, 3B and 4A are designations according to the ISO 2328 standard, which defines the dimensions and type of mounting hooks for forklift forks. In classes 2A and 2B, the distance between the upper and lower hook is approximately 407 mm; in classes 3A and 3B approximately 508 mm, and in class 4A approximately 635 mm. The letters A and B indicate the hook type (hook profile). The forklift carriage class must match the fork class to ensure correct and safe installation.
IS A SAFETY LOCK INCLUDED WITH THE FORKS?
Yes. A locking pin is included with the forks to prevent them from slipping off the carriage holder.
Ask about product
Technical informations
Specific References
- EAN13
- 1000000994643
You might also like
16 other products in the same category:
Customers who bought this product also bought:
Product Review
-
Reviews (0)
-
Latest
-
Latest