Forks for forklift 800 mm
Indeks: 80*40*800/B
Quantity: 166
State: Available
Product Review
-
Reviews (1)
-
Latest
-
Latest
Forks for Forklift 800 mm
The forks are made of high-quality structural steel. They are universally applicable and can therefore be mounted on forklifts of various brands, provided that the forklift class and load capacity are maintained.
- • Profile dimensions: 80x40 / 100x35 / 100x40 / 100x45 mm
- • Load capacity: 2000 / 2500 / 3500 kg
- • Fork class: 2A / 2B / 3A
- • Fork length: 800 mm
 | Safety lock The forks are sold with a locking pin that prevents accidental slipping off the carriage during operation and maneuvering. |
Before purchasing
CHECK CARRIAGE CLASS COMPATIBILITY | SELECT PROFILE DIMENSIONS ACCORDING TO LOAD DIMENSIONS | VERIFY FORK LENGTH IN RELATION TO THE REQUIRED SUPPORT SURFACE |
How to check the carriage class and fork condition before replacement?
To verify fork class 2A, 2B or 3A, it must be confirmed in accordance with the ISO 2328 standard by measuring the distance between the upper and lower hook of the forklift carriage. In classes 2A and 2B, this height is approximately 407 mm, while in class 3A approximately 508 mm. The letters A and B indicate the hook type (hook profile), while the height remains the same within a given numerical class. The class can be verified by direct measurement on the carriage, by checking the forklift nameplate, or by consulting the manufacturer’s technical documentation — proper class matching is a requirement for safe fork installation.
Before replacement, the technical condition of the existing forks should also be assessed. Forks must be replaced if the thickness of the working section has decreased by approximately 10% compared to the nominal dimension, if there are cracks in the hook area or at the heel, or if permanent deformation or twisting of the profile is present. Cross-section wear leads to an actual reduction in forklift load capacity and may be questioned during a UDT inspection.
FAQ
CAN FORKS BE REPLACED INDIVIDUALLY?
No. Forks should be replaced in pairs to ensure even load distribution and forklift stability.
WHEN SHOULD FORKS BE REPLACED?
In case of permanent deformation, breakage, twisting, or significant cross-section wear. Damaged forks should not be used further.
WHAT DO CLASSES 2A, 2B AND 3A MEAN?
Fork classes 2A, 2B and 3A are designations according to the ISO 2328 standard, which defines the dimensions and type of mounting hooks for forklift forks. In classes 2A and 2B, the distance between the upper and lower hook is approximately 407 mm, while in class 3A approximately 508 mm. The letters A and B indicate the hook type (mounting profile). The carriage class must match the fork class to ensure correct and safe installation.
IS A SAFETY LOCK INCLUDED WITH THE FORKS?
Yes. A locking pin is included with the forks to prevent them from slipping off the carriage holder.
Ask about product
Technical informations
Specific References
- EAN13
- 1000000829006
You might also like
16 other products in the same category:
- New
Customers who bought this product also bought:
Product Review
-
Reviews (1)
-
Latest
-
Latest