Starter, Nissan H20, H20-2, H25, TCM

Indeks: 417086/3

Quantity: 101

State: Available

£47.54 brutto

£47.54 netto

  • Total sales: 182

Product compliance details: Manufacturer responsible for the product

Product safety

JAZGOT

Manufacturer

Safety Information

In accordance with Regulation (EU) 2023/988 on General Product Safety (GPSR), below are the rules for the safe use of the starter motor for forklift trucks:

Application

The starter motor is part of the starting system of a forklift with a combustion engine. Its function is to start the engine by turning the crankshaft. A properly functioning starter motor is essential for starting the vehicle.

Usage rules

  • Use only in the forklift models and engines for which it is intended.
  • Installation should be carried out by a qualified mechanic in accordance with the manufacturer’s instructions.
  • Before starting work, disconnect the battery and secure the electrical system.
  • After installation, check the wiring and test the starter motor under safe conditions.

Precautions

  • Do not use a starter motor with visible damage or burn marks.
  • Avoid short circuits, loose connections, and installation in damp environments.
  • Incorrect wiring may damage the starter motor or the electrical system.
  • If malfunctions occur (slow cranking, grinding noises, no response), stop use immediately and perform an inspection.

Support and reporting

If you have questions regarding installation, operation or compatibility of the product, please use the contact form available on the Allegro platform.

Disposal

A used starter motor must be taken to an electrical and electronic waste collection point in accordance with applicable regulations.

Compare
Rating:
(0)

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful

Starter Nissan H20 / H20-2 / H25 / TCM 12V 1.4 kW

This starter is designed for forklift trucks with Nissan engines. It fits many units used in these machines, including H20, H25 and K25. The parameters correspond to standard starting systems, which is why it is suitable for many Nissan and TCM forklift models.

Technical parameters

  • The voltage is 12 V.
    It corresponds to the electrical system used in these trucks.
  • The power is 1.4 kW.
    It is sufficient for starting engines of this class.
  • The pinion has 9 teeth.
    It ensures proper engagement with the ring gear in H20 and H25 engines.
  • The housing has 2 mounting holes.
    This is the typical mounting configuration for this type of starter.
  • The overall length is approximately 200 mm.
    It allows quick comparison with the old starter before installation.

Compatibility

The starter fits the following machines:

  • Nissan – engines H20, H20-2, H25, K21, K25
  • TCM – models with the same Nissan engines

This solution is used in common warehouse and industrial trucks.

What matters in this model

This type of starter is based on a specific configuration:

  • 9 teeth on the pinion
  • 2 mounting points
  • a defined housing length

These three elements determine compatibility. A difference in even one of them means the starter will not fit.

What to check before purchase

Before purchase, compare:

  • the number of pinion teeth
  • the layout and number of mounting holes
  • the length of the starter
  • the number of the old starter

For these models, compatibility is determined by dimensions and design, not only by the engine designation.

Ask about product

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Technical informations

Producer
Jazgot
Piece number
H25 N-23300-K9160
Application
Jazgot
Nissan
TCM
Guarantee
12 months
Mounting hole spacing
109 mm
Rated power
1.4 kW
Voltage
12 V
Number of mounting holes
2
Application in the model of the truck
Jaguar: 675, 680, 682, 685, 690, 800
Application in the engine model
Nissan H20
Nissan H25
Nissan K21
Nissan K25
Number of teeth
9
Mounting hole diameter
11,5 mm
Attention
Please purchase with consideration. The goods are sealed. Once the seal has been removed, the amount of the refund may be reduced.
OEM
111108, 11698, 17437N, 20437251BN, 20513039, 20779, 22.0779, 23300-K9160, 23300-W9810, 25-1034, 6035152, 8213082, 88213082, 8EA732664-001, 9567, CGB-23345, CGB-23558, CST35152, CST35152AS, CST35152ES, CST35152GS, CST35152OS, CST35152RS, DRS3345,
EAA-121437, JS779, LRS01119, LRS1119, M001T60381, M1T60081, M1T60381, MAV6170, RNLM1T60081, S5010, STR-3015, STR3015, STRL658, ANM15565X, 160.517.092.139, 160.518.092.080, 160.517.092.130, 160.517.092.138, 160.517.092.208, STR5035, 55, 550010,
M001T60081, STX200177, STX200177R

You might also like

16 other products in the same category:

Customers who bought this product also bought:

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful
4.8
star star star star star
(416)