Forklift forks 1150 mm
Indeks: 100*40*1150
Quantity: 16
State: Available
Product Review
-
Reviews (0)
-
Latest
-
Latest
Forks for Forklift 1150 mm
The forks are made of high-quality structural steel. They are universally applicable and can therefore be mounted on forklifts of various brands, provided that the fork class and load capacity are maintained.
- • Profile dimensions: 100 x 40 / 100 x 45 mm
- • Load capacity: 2500 kg
- • Carriage class: 2A
- • Fork length: 1150 mm
 |
Safety lock
The forks are sold with a locking pin that prevents accidental slipping off the carriage during operation and maneuvering. |
Before purchasing
|
CHECK CARRIAGE CLASS COMPATIBILITY
|
SELECT PROFILE DIMENSIONS ACCORDING TO LOAD SIZE
|
VERIFY FORK LENGTH IN RELATION TO REQUIRED SUPPORT SURFACE
|
How to check the fork class and fork condition before replacement?
Before selecting forklift forks, the fork class according to ISO 2328 must be confirmed. In class 2A, the distance between the upper and lower hook is approximately 407 mm. This value must be verified by measuring the forklift carriage (between the upper and lower hook), checking the nameplate, or consulting the technical documentation. Choosing the wrong class prevents safe fork installation.
Before replacement, the technical condition of the existing forks should also be assessed. Forks must be replaced if their thickness in the working area has decreased by approximately 10% compared to the nominal dimension, if they show cracks in the hook area or at the heel, or exhibit permanent deformation or twisting of the profile. Cross-section wear leads to an actual reduction in forklift load capacity and may be questioned during a UDT inspection.
FAQ
CAN FORKS BE REPLACED INDIVIDUALLY?
No. Forks should be replaced in pairs to ensure even load distribution and forklift stability.
WHEN SHOULD FORKS BE REPLACED?
In case of permanent deformation, breakage, twisting, or significant cross-section wear. Damaged forks should not be used further.
WHAT DOES CLASS 2A MEAN?
Fork class 2A is a designation according to the ISO 2328 standard, which defines the height and spacing of forklift fork mounting hooks. In class 2A, the distance between the upper and lower hook is approximately 407 mm. The carriage class must match the fork class to ensure proper and safe installation.
ARE THE FORKS EQUIPPED WITH A SAFETY LOCK?
Yes. A locking pin is included with the forks to prevent them from slipping off the forklift carriage.
Ask about product
Technical informations
Specific References
- EAN13
- 1000000828894
You might also like
16 other products in the same category:
- New
Customers who bought this product also bought:
Product Review
-
Reviews (0)
-
Latest
-
Latest