Starter 6792N for GM engine capacity 3.0 and 4.3L

Indeks: JG1025

Quantity: 7

State: Available

£82.08 brutto

£82.08 netto

  • Total sales: 65

Product compliance details: Manufacturer responsible for the product

Product safety

JAZGOT

Manufacturer

Safety Information

In accordance with Regulation (EU) 2023/988 on General Product Safety (GPSR), below are the rules for the safe use of the starter motor for forklift trucks:

Application

The starter motor is part of the starting system of a forklift with a combustion engine. Its function is to start the engine by turning the crankshaft. A properly functioning starter motor is essential for starting the vehicle.

Usage rules

  • Use only in the forklift models and engines for which it is intended.
  • Installation should be carried out by a qualified mechanic in accordance with the manufacturer’s instructions.
  • Before starting work, disconnect the battery and secure the electrical system.
  • After installation, check the wiring and test the starter motor under safe conditions.

Precautions

  • Do not use a starter motor with visible damage or burn marks.
  • Avoid short circuits, loose connections, and installation in damp environments.
  • Incorrect wiring may damage the starter motor or the electrical system.
  • If malfunctions occur (slow cranking, grinding noises, no response), stop use immediately and perform an inspection.

Support and reporting

If you have questions regarding installation, operation or compatibility of the product, please use the contact form available on the Allegro platform.

Disposal

A used starter motor must be taken to an electrical and electronic waste collection point in accordance with applicable regulations.

Compare
Rating:
(0)

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful

Starter Motor for GM 3.0 / 4.3L Engines – 6792N, 12V, 1.4 kW, 11 Teeth

Starter motor for forklifts equipped with GM 3.0 and 4.3L engines, used in machines such as Jungheinrich and Hyster. Model 6792N is a replacement for DELCO starters, which makes it easier to verify compatibility based on part numbers or the parameters of the installed starter.

Compatibility with GM 3.0 and 4.3L engines

This model is intended for GM 3.0 and 4.3L engines used in forklifts across various manufacturers.

In this group, proper selection is based on specific technical parameters and mounting dimensions. Before purchasing, compare:

  • model designation or part number,
  • number of pinion teeth,
  • mounting hole spacing and diameter,
  • rotation direction,
  • overall length.

Matching these parameters determines whether the starter will fit the engine and allow proper installation.

Operating parameters and rotation direction

The starter operates at 12V with a power output of 1.4 kW.

The CW rotation direction (clockwise) is critical for proper fitment – incompatibility in this parameter will prevent correct engine starting.

What’s included

Mounting bolts are included, allowing you to proceed directly with the starter replacement.

Technical specifications

Model 6792N
Replacement for DELCO
Voltage 12V
Power 1.4 kW
Number of teeth 11
Rotation direction CW
Number of mounting holes 2
Mounting hole spacing 83 mm
Mounting hole diameter 10 mm
Overall length 244 mm
Engine GM 3.0 / 4.3L
Application Jungheinrich, Hyster forklifts
Included mounting bolts
Manufacturer Jazgot
Warranty 12 months

Ask about product

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Technical informations

Producer
Jazgot
Model
6562NM
Overall length
244 mm
Application
Hyster
Jungheinrich
Guarantee
12 months
Mounting hole spacing
83 mm
Rated power
1.4
Voltage
12 V
Application in the engine model
GM 3.0 i 4.3
Number of splines
11
Safety certificate
yes
Mounting hole diameter
10 mm
OEM
11.138.313, 111786, 115985, 12570230, 12570623, 22.1240, 22.1240M, 25-2125, 255475, 26-3033, 35261180, 601029, 60859, 6792N, 6792N-MD, 8196, 8212222, 8EA737959-001, 9000762, 9000819, 9000821, 9000839, 9000885, 9000899, AZE2127, F042003047,
50-812428A3, 50-812604A2, 50-822330A2, 50-863007A1, 50807904A1, 50864340A2, STX200947, 830.526.112.030, 970.501.112.030
LRS01800, LRS1800, MAV621020, RNL1240US, S1008, S1100R, S1101R, STR80100, STRL301, STRW227, US1240, S12DR0307A2, 339001, 112239, STR2087, STR2034, 3587625, 3855177, 3860566, 3860566, 3885317, 3885317, 50-807907, 50-809904A1,

You might also like

16 other products in the same category:

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful
4.8
star star star star star
(416)