Starter for Linde 391/392/393/394 with VW BJC engine

Indeks: WALD0090

Quantity: 6

State: Available

£136.36 brutto

£136.36 netto

  • Total sales: 3

Product compliance details: Manufacturer responsible for the product

Product safety

JAZGOT

Manufacturer

Warnings and safety information

  • CE Mark
    CE Mark

    Has the CE mark (complies with EU standards).

Safety Information

In accordance with Regulation (EU) 2023/988 on General Product Safety (GPSR), below are the rules for the safe use of the starter motor for forklift trucks:

Application

The starter motor is part of the starting system of a forklift with a combustion engine. Its function is to start the engine by turning the crankshaft. A properly functioning starter motor is essential for starting the vehicle.

Usage rules

  • Use only in the forklift models and engines for which it is intended.
  • Installation should be carried out by a qualified mechanic in accordance with the manufacturer’s instructions.
  • Before starting work, disconnect the battery and secure the electrical system.
  • After installation, check the wiring and test the starter motor under safe conditions.

Precautions

  • Do not use a starter motor with visible damage or burn marks.
  • Avoid short circuits, loose connections, and installation in damp environments.
  • Incorrect wiring may damage the starter motor or the electrical system.
  • If malfunctions occur (slow cranking, grinding noises, no response), stop use immediately and perform an inspection.

Support and reporting

If you have questions regarding installation, operation or compatibility of the product, please use the contact form available on the Allegro platform.

Disposal

A used starter motor must be taken to an electrical and electronic waste collection point in accordance with applicable regulations.

Compare

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)

Starter Linde 391 / 392 / 393 / 394 – VW BJC engine 12V

The starter is designed for Linde forklift trucks equipped with the Volkswagen BJC engine. It fits series 391, 392, 393 and 394 as well as models H15, H20, H25, H30 and H35. The parameters correspond to the starting systems used in these units, which is why it fits many configurations based on this engine.

Technical parameters

  • The voltage is 12 V.
    It corresponds to the electrical system used in these trucks.
  • The pinion has 10 teeth.
    It ensures proper engagement with the ring gear in VW BJC engines.
  • The housing has 2 mounting holes.
    This is a typical mounting configuration for this design.
  • The hole spacing is 110 mm.
    This dimension determines proper fit to the engine housing.
  • The mounting hole diameter is 12.5 mm.
    It is adapted to standard bolts used in these trucks.
  • The overall length is approximately 259 mm.
    It allows quick comparison with the old starter before installation.

Compatibility

The starter fits the following machines:

  • Linde – series 391, 392, 393, 394
  • models H15, H20, H25, H30, H35
  • trucks equipped with the Volkswagen BJC engine

What matters in this model

This type of starter is based on a specific configuration:

  • 10 teeth on the pinion
  • hole spacing of 110 mm
  • length of approximately 259 mm

These three elements determine compatibility. A difference in even one of them means the starter will not fit.

What to check before purchase

Before purchase, compare:

  • the number of pinion teeth
  • the spacing and diameter of mounting holes
  • the length of the starter
  • the number of the old starter (e.g. VW02M911023Q)

For these models, compatibility is determined by dimensions and design, not only by the truck designation.

Ask about product

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Technical informations

Producer
Jazgot
Piece number
VW02M911023Q
Overall length
259 mm
Application
Linde
CE Declaration of Conformity
yes
Guarantee
12 months
Number of mounting holes
2
Mounting hole spacing
110 mm
Voltage
12 V
Application in the model of the truck
LINDE H15, H20, H25, H30, H35
Number of splines
10
Mounting hole diameter
12,5 mm
OEM
02M911023QX, 2M911023Q, 2M911023QX, 32706N, WG2013217, WG2045146, WG2196600, WG2372383, STR50278
3116829, 3116830, 42020270, H5010155, 6.7047.1, 10010275AV, 10010275OV, 11010109, STB1405, 101405, 101405B, LES0567, 9710176, 332074, LRS01706, LRS1706, 63521256050, 63721405010, 943214051010, 944280202700, MQS1405, MRS20270, MSN2180, 5010155,
6010275.1, S12BH0059, S12BH0059A2, MAV122750, MAV122750A, VW9083, STX200034, STX200034R, STX200040, STX200040R, SKSTR-0330020, 073ST21, 06-10093-SX, TT16340, TT16340PRO, RE83600N, ST01321, 201161, 438429, 458730, V10-12-20270, 02M911023Q,
12138043, 4720280, 2131387, 13855, 88213320, S1333B, IR9528, 300.552.102.010, 300.552.102.211, 300.552.102.280, 300.552.102.312, 300.552.102.340, QRS1603, 20401572BN, 20401572OE, 011-001-000388R, 2S0021, 120-10132, 120-10132NOE, STM587, 6010275.0,
CST10275AS, CST10275GS, 3050, CMA-621156, 311095102, S-50278, 12073, STR1358, 25-3256, EZ0416, 220661, 220661A, 1638119680, 11020270, 105280, 188314, 8020270, SG2102, GS125605-A, GS125605B-R, SS125605-A, SS125605B-R, CS1405, 8EA012526-111, 3116828
S0214, PRSW454, PRSW454B, STRW454, STRW454B, STRW454NE, AZMT-53-010-1349, AC-CBS1405, AI-80028, 10439716, ANM22490, ANM22490X, A20270, AEY1706, SBO275, SBO275A, BST2039, 1125605, 1125606, 986020270, 1986S00823, S512441, 113678, 115507, F032113678

You might also like

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
4.8
star star star star star
(416)