Alternator Mazda FE 1450928

Indeks: J10168

Quantity: 25

State: Available

£59.05 brutto

£59.05 netto

Product compliance details: Manufacturer responsible for the product

Product safety

JAZGOT

Manufacturer

Safety Information

In accordance with Regulation (EU) 2023/988 on General Product Safety (GPSR), below are the rules for the safe use of the alternator for forklift trucks.

Application

  • Part of the forklift’s electrical system, responsible for generating electricity and charging the battery during engine operation.
  • Powers the electrical system and vehicle components.

Hazards

  • Risk of electric shock if handled improperly or when working with the engine running.
  • Possible damage to the electrical system if connected incorrectly.
  • Risk of overheating and fire due to short circuit, faulty voltage regulator or damaged cables.
  • Risk of mechanical injury from the rotating pulley of the alternator.

Operating conditions

  • Use only alternators that match the forklift’s technical specifications.
  • Do not use damaged, burnt, or worn components.
  • Protect from excessive moisture and dirt.

Installation and connection

  • Installation should be carried out by qualified service personnel.
  • Disconnect the battery and ensure the wiring is free of short circuits before connection.
  • Ensure proper belt tension – too loose or too tight may damage the alternator.
  • Connect cables acc
Compare
Rating:
(0)

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful

Alternator for Forklift with Mazda FE Engine – 12V 40A, OEM 1450928

This alternator is designed for forklifts equipped with the Mazda FE engine (2.0 / 2.2), commonly used in machines from Hyster, Yale, Mitsubishi and Jungheinrich. The 12V system and 40A output match the electrical setup of these units, ensuring stable operation without the need for modifications.

OEM number: 1450928

Replacement numbers: 3068342, 3114961, 3123908, 800045600, 400-48010, 400-48010R, 400-48062, AMT0001, 12138, 12138N

Construction

The aluminum housing helps dissipate heat during operation. The mounting layout follows the design used in Mazda FE engines, allowing direct installation without any adjustments.

The voltage regulator and fan are integrated into a single compact unit. This solution reduces the number of separate components and simplifies everyday use.

At the rear, you will find:

  • 2-pin electrical connector
  • power output on a threaded stud (B+)

Mounting

The unit uses a standard mounting system:

  • the lower point acts as a pivot
  • the upper bracket allows belt tension adjustment

The mounting hole spacing is approximately 155–160 mm, matching the original configuration.

Drive

The alternator works with a standard pulley without an overrunning clutch. This setup matches the simple and durable belt drive used in Mazda FE engines.

Check before installation

Before installation, it is recommended to compare:

  • mounting hole spacing
  • connector type
  • pulley design

The most reliable method is to match the OEM number and compare the appearance with the removed part.

Technical specifications

Voltage 12V
Current 40A
OEM number 1450928
Replacement numbers 3068342, 3114961, 3123908, 800045600, 400-48010, 400-48010R, 400-48062, AMT0001, 12138, 12138N
Type with regulator and fan
Electrical connector 2-pin
Power output threaded stud (B+)
Mounting two-point
Hole spacing approx. 155–160 mm
Pulley standard
Housing aluminum

Ask about product

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Technical informations

Producer
Jazgot
Application
Hyster
Jungheinrich
Mitsubishi
Yale
Guarantee
12 months
Application in the model of the truck
Hyster S40XM, S45XM, S50XM, S55XM, S60XM, S65XM, S60FT
Application in the engine model
Mazda FE
Attention
Please purchase with consideration. The goods are sealed. Once the seal has been removed, the amount of the refund may be reduced.
OEM
3068342, 3114961, 3123908, 800045600, 400-48010, 400-48010R, 400-48062, AMT0001, 12138, 12138N
‎S5SN-18-300, S5SN-18-300A, S5SN18-300, SS5SN178-300, A007T03277, A007T03277A, 7000215, 1500145-04, 2690027-70, 5059605-60, 5059765-79, 5800009-90, 8000456-00, 9019488-01, 00591-33580-81, 00591-55973-81, 14485060, 1361853, 1450928

You might also like

16 other products in the same category:

Customers who bought this product also bought:

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful
4.8
star star star star star
(416)