Alternator 12V, 50A, Mitsubishi 4G63/64

Indeks: 406160

Quantity: 22

State: Available

£65.63 brutto

£65.63 netto

  • Total sales: 11

Product compliance details: Manufacturer responsible for the product

Product safety

JAZGOT

Manufacturer

Safety Information

In accordance with Regulation (EU) 2023/988 on General Product Safety (GPSR), below are the rules for the safe use of the alternator for forklift trucks.

Application

  • Part of the forklift’s electrical system, responsible for generating electricity and charging the battery during engine operation.
  • Powers the electrical system and vehicle components.

Hazards

  • Risk of electric shock if handled improperly or when working with the engine running.
  • Possible damage to the electrical system if connected incorrectly.
  • Risk of overheating and fire due to short circuit, faulty voltage regulator or damaged cables.
  • Risk of mechanical injury from the rotating pulley of the alternator.

Operating conditions

  • Use only alternators that match the forklift’s technical specifications.
  • Do not use damaged, burnt, or worn components.
  • Protect from excessive moisture and dirt.

Installation and connection

  • Installation should be carried out by qualified service personnel.
  • Disconnect the battery and ensure the wiring is free of short circuits before connection.
  • Ensure proper belt tension – too loose or too tight may damage the alternator.
  • Connect cables acc
Compare

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)

Alternator 12V 50A Mitsubishi 4G63 / 4G64

The 12V alternator with an output of 50A is used in forklifts equipped with Mitsubishi 4G63 and 4G64 engines. Its operating parameters match the electrical systems used in these units, so the component works with the existing installation without requiring modifications.

OEM numbers MD316418 and MD354890 help to match the alternator to a specific configuration and reduce the risk of choosing an incorrect part.

Construction

The design features a three-point mounting system — two lower points and one upper bracket. This layout is clearly visible and corresponds to solutions used in this type of alternator.

At the front, there is a pulley designed to operate with a V-belt.

Connection

The alternator has:

  • a current output in the form of a threaded terminal
  • an additional electrical connection in the form of a connector

This setup corresponds to systems used in forklifts equipped with these engines.

Compatibility

Before installation, it is recommended to compare:

  • OEM numbers
  • mounting layout
  • overall appearance of the alternator

The most reliable method is to compare it with the removed component.

Technical specifications

Voltage 12V
Current 50A
OEM numbers MD316418, MD354890
Application Mitsubishi engines 4G63, 4G64
Mounting three-point
Drive pulley for V-belt

Ask about product

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Technical informations

Producer
Jazgot
Piece number
MD316418 MD354890
CE Declaration of Conformity
yes
Guarantee
12 months
Voltage
12 V
Brand of pushchair
Mitsubishi
Attention
Please purchase with consideration. The goods are sealed. Once the seal has been removed, the amount of the refund may be reduced.

You might also like

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
4.8
star star star star star
(416)