Forks for forklift 1800 mm
Indeks: 80*40*1800
Quantity: 14
State: Available
Product Review
-
Reviews (0)
-
Latest
-
Latest
Forks for Forklift 1800 mm
The forks are made of high-quality structural steel. They are universally applicable and can therefore be mounted on forklifts of various brands, provided that the fork class and load capacity are maintained.
- • Profile dimensions: 80x40 / 100x40 / 100x45 / 100x50 / 120x45 / 120x45 / 125x50 / 130x60 / 140x50 / 150x50 / 150x60 / 150x75 / 200x75 mm
- • Load capacity: 2000 / 2500 / 3400 / 3500 / 4100 / 5000 / 5500 / 6000 / 7000 / 8000 / 10 000 / 13 000 kg
- • Fork class: 2A / 2B / 3A / 3B / 4A / 4B
- • Fork length: 1800 mm
 |
Safety lock
The forks are sold with a locking pin that prevents accidental slipping off the carriage during operation and maneuvering. |
Before purchasing
|
CHECK CARRIAGE CLASS COMPATIBILITY
|
SELECT PROFILE DIMENSIONS ACCORDING TO LOAD DIMENSIONS
|
VERIFY FORK LENGTH IN RELATION TO THE REQUIRED SUPPORT SURFACE
|
How to check the mast carriage class and fork condition before replacement?
Before selecting forks, the fork class according to ISO 2328 must be confirmed, as it defines the height and spacing of the mounting hooks. The classes differ by the height between the upper and lower hook: 2A/2B – approx. 407 mm, 3A/3B – approx. 508 mm, 4A/4B – approx. 635 mm. The designations “A” and “B” refer to the hook construction (hook type), while the height remains the same within a given class. The class can be verified by measuring the distance between the upper and lower hook on the carriage, checking the forklift nameplate, or consulting the manufacturer’s technical documentation. Proper matching of the fork class to the forklift carriage class is required for safe installation and maintaining the rated load capacity of the forklift.
Before replacement, the technical condition of the existing forks should also be assessed. Forks must be replaced if their thickness in the working area has decreased by approximately 10% compared to the nominal dimension, if they show cracks in the hook area or at the heel, or exhibit permanent deformation or twisting of the profile. Cross-section wear leads to an actual reduction in forklift load capacity and may be questioned during a UDT inspection.
FAQ
CAN FORKS BE REPLACED INDIVIDUALLY?
No. Forks should be replaced in pairs to ensure even load distribution and forklift stability.
WHEN SHOULD FORKS BE REPLACED?
In case of permanent deformation, cracks, twisting, or significant cross-section wear. Damaged forks should not be used further.
WHAT DO CLASSES 2A, 2B, 3A, 3B, 4A AND 4B MEAN?
Classes 2A, 2B, 3A, 3B, 4A and 4B are designations according to the ISO 2328 standard, which defines the dimensions and type of mounting hooks for forklift forks. The number (2, 3, 4) indicates the height between the upper and lower hook: 2 – approx. 407 mm, 3 – approx. 508 mm, 4 – approx. 635 mm. The letters A and B specify the hook type (mounting profile). The fork class must match the carriage class to ensure correct and safe installation.
IS A SAFETY LOCK INCLUDED WITH THE FORKS?
Yes. A locking pin is included with the forks to prevent them from slipping off the carriage.
Ask about product
Technical informations
Specific References
- EAN13
- 1000000828979
You might also like
16 other products in the same category:
- New
Customers who bought this product also bought:
Product Review
-
Reviews (0)
-
Latest
-
Latest