Starter for Mazda FE Engine, 12V

Indeks: H1044

Quantity: 141

State: Available

 

£49.18 brutto

£49.18 netto

  • Total sales: 208

Product compliance details: Manufacturer responsible for the product

Product safety

JAZGOT

Manufacturer

Safety Information

In accordance with Regulation (EU) 2023/988 on General Product Safety (GPSR), below are the rules for the safe use of the starter motor for forklift trucks:

Application

The starter motor is part of the starting system of a forklift with a combustion engine. Its function is to start the engine by turning the crankshaft. A properly functioning starter motor is essential for starting the vehicle.

Usage rules

  • Use only in the forklift models and engines for which it is intended.
  • Installation should be carried out by a qualified mechanic in accordance with the manufacturer’s instructions.
  • Before starting work, disconnect the battery and secure the electrical system.
  • After installation, check the wiring and test the starter motor under safe conditions.

Precautions

  • Do not use a starter motor with visible damage or burn marks.
  • Avoid short circuits, loose connections, and installation in damp environments.
  • Incorrect wiring may damage the starter motor or the electrical system.
  • If malfunctions occur (slow cranking, grinding noises, no response), stop use immediately and perform an inspection.

Support and reporting

If you have questions regarding installation, operation or compatibility of the product, please use the contact form available on the Allegro platform.

Disposal

A used starter motor must be taken to an electrical and electronic waste collection point in accordance with applicable regulations.

Compare
Rating:
(0)

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful

Starter Motor for Mazda FE Engine – 12V, 0.9 kW, 8 Teeth, Gear Reduction

Starter motor designed for forklifts equipped with the Mazda FE engine, used in machines from brands such as Hyster, Yale, Jungheinrich and Mitsubishi. It is commonly found in models including H-25XL, H-35XL, H-50XL, H-60XL as well as S-25XL and S-40XL.

This starter can be used as a replacement for the following OEM numbers: 1362069, 1534424, 2314322, 3114995 and M003T10476.

Compatibility with Mazda FE engine

This model is designed to work with the Mazda FE engine used across various forklift manufacturers.

Proper selection depends on key mechanical parameters. Before purchasing, check:

  • starter designation,
  • number of pinion teeth,
  • mounting hole spacing,
  • overall length.

Matching these parameters ensures correct fitment and proper operation in the engine.

Operating parameters and rotation direction

The starter operates in a 12V system and delivers 0.9 kW of power.

It is equipped with an 8-tooth pinion, which must match the flywheel — any mismatch prevents proper engagement.

Rotation direction is CW (clockwise) and must correspond to the engine configuration.

Gear reduction design

The gear reduction design changes how torque is transferred to the pinion.

In practice, this results in a different operating ratio compared to direct-drive starters, which is important for compatibility with specific engine types.

Technical specifications

OEM numbers 1362069, 1534424, 2314322, 3114995, M003T10476
Voltage 12V
Power 0.9 kW
Number of teeth 8
Rotation direction CW
Number of mounting holes 2
Mounting hole spacing 105 mm
Overall length 195 mm
Engine Mazda FE

Ask about product

Please fill below informations. Customer service will contact with You soon as is possible.

* Required fields

Technical informations

Producer
Jazgot
Piece number
1362069 1534424 2314322 3114995 M003T10476
Overall length
195 mm
Application
Hyster
Jungheinrich
Mazda
Mitsubishi
Yale
Guarantee
12 months
Number of mounting holes
2
Mounting hole spacing
105 mm
Voltage
12 V
Number of teeth
8
Attention
Please purchase with consideration. The goods are sealed. Once the seal has been removed, the amount of the refund may be reduced.
OEM
91-27-3300N, AES5100, CGB-21476, CST35126, CST35126AS, CST35126ES, CST35126GS, CST35126OS, CST35126RS, FESE-18-400, FFSC-18-400, FFSC-18-400A, FFSN-18-400, J5215011, JS674, LRS00500, LRS500, M000T84381, M000T84381A, M000T92581, M003T10471, M003T10473
140.014.082.415, 140.014.082.460
986012831, 110182, 111494, 140.014.082, 1534424, 18096N, 18096R, 20437621, 20674, 243-10111, 25-1157, 33901, 4893-18-400, 4893-18-400A, 4893-18-400B, 4893-18-400C, 4893-18-400D, 4893-18-400E, 6035126, 8673, 88212749, 8EA730262-001, 91-27-3300,
M003T10475, M003T10476, M003T10476D, M0T34381, M0T84381, M0T84381A, M0T84381AM, M0T92581, M3T10473, M3T10475, M3T10476, M3T10476D, MAV371260, MITM0T84381, MT92581, RNLM0T84381, S-8818, S1140M, S5261S, SG0312, STM0674, STM9674, STR71099, STRL621,
UD14312S, UD18233S, S12MH0555A2, PRSL621, 16795N, STR5235, 1362069, 011007-53002S, 220052112, 3003784, 3021367, 3114995, 3125892, 326875, 388040, 580040914, 900540849, 900540857, 918139600, M000T34381, M000T84381AM, STX200344R, STX200344, 2314322,

You might also like

16 other products in the same category:

Customers who bought this product also bought:

Product Review

Average rating

0.0
0 Review
★★★★★ Excellent 0
★★★★☆ Good 0
★★★☆☆ Medium 0
★★☆☆☆ Poor 0
★☆☆☆☆ Terrible 0

  • Reviews (0)
    • All reviews (0)
    • Has image/video (0)
    • Excellent (0)
    • Good (0)
    • Medium (0)
    • Poor (0)
    • Terrible (0)
  • Latest
    • Latest
    • Oldest
    • High rating
    • Low rating
    • Helpful
  • Latest
    • Latest
    • Oldest
    • Helpful
4.8
star star star star star
(416)